Free calculator

Concrete Block Calculator: How Many Blocks Do I Need?

Enter your wall length, height, and openings to get an exact block count for standard 8×8×16-in CMU — plus mortar bags and pallets, with a cutting-waste allowance built in. No sign-up; the math runs entirely in your browser.

By Basharat Ali, FounderCalculation reviewedUpdated October 2026

feet

feet

sq ft (doors, windows)

nominal

%

You need

95 blocks

Mortar (80-lb bags, est.)

4

Pallets (≈90 blocks each)

2

Net wall area

80 sq ft

Steps: 80 sq ft gross − 0 sq ft openings = 80 sq ft × 1.125 blocks/sq ft = 90 + 5% waste, rounded up. Standard 8×8×16-in nominal block with ⅜-in mortar joints.

Estimated cost

What will it cost?

Enter your local store prices — prices vary by region.

  • Concrete blocks (8-in)

    95 blocks

    —

  • Mortar mix (80-lb bags)

    4 bags

    —

Estimate — prices vary by store and region. Check your local store for current pricing.

Worked example: 20×4 ft garden wall

Full arithmetic, step by step (matches the calculator defaults):

  1. Gross area: 20 ft × 4 ft = 80 sq ft
  2. Blocks: 80 × 1.125 = 90 blocks
  3. With 5% waste: 90 × 1.05 = 94.5 → 95 blocks
  4. Mortar: 95 ÷ 25 = 3.8 → 4 bags (80-lb Type S, estimate)
  5. Pallets: 95 ÷ 90 = 1.06 → 2 pallets

The formulas

Blocks

Blocks = ⌈ (L × H − openings) × 1.125 × (1 + waste) ⌉ — 1.125 is the published blocks-per-square-foot figure for nominal 8×8×16-in block with ⅜-in joints, always rounded up.

Mortar (estimate)

Bags = ⌈ blocks ÷ 25 ⌉ — one 80-lb bag of Type S mortar lays roughly 25 standard blocks. Treat as a planning estimate; joint thickness and block width move the number.

Pallets

Pallets = ⌈ blocks ÷ 90 ⌉ — about 90 8×8×16 blocks per standard pallet.

Frequently asked questions

How many 8×8×16 concrete blocks are in a square foot?

About 1.125 blocks per square foot (1⅛ blocks). A nominal 8×8×16-in block plus one ⅜-in mortar joint covers 16 × 8 inches of wall face — 0.889 sq ft — so 1 ÷ 0.889 = 1.125. This calculator uses that published figure, then adds your waste allowance and rounds up.

How many blocks do I need for a 20×4 ft wall?

20 × 4 = 80 sq ft × 1.125 = 90 blocks, plus 5% cutting waste = 94.5, so order 95 blocks. At roughly 25 blocks per 80-lb bag of mortar, that's 4 bags of Type S mortar — and just over one standard pallet (about 90 blocks each), so 2 pallets.

How many mortar bags do I need for concrete block?

As an estimate, one 80-lb bag of Type S mortar lays roughly 25 standard 8×8×16 blocks. Divide your block count by 25 and round up. Wider blocks and sloppy joints use more — treat the bag count as a planning estimate and keep a spare bag on hand.

How many concrete blocks fit on a pallet?

A standard pallet holds about 90 8×8×16 blocks (roughly 3,000+ lb — confirm your supplier's count and your delivery truck's access). This calculator converts your block count to pallets so you can plan delivery.

Should I subtract doors and windows from a block wall?

Yes. Enter the total opening area in square feet and the calculator subtracts it before counting blocks. Openings also need lintels and extra mortar at the jambs, so keep the waste allowance at 5% or higher on walls with several openings.

What's the difference between CMU, cinder block, and concrete block?

Mostly the same product today: CMU (concrete masonry unit) is the technical name, and modern 'cinder blocks' are made with concrete aggregate, not cinders. This calculator's 1.125 blocks/sq ft figure applies to the standard 8×8×16-in nominal unit regardless of what your supplier calls it.

Keep estimating

Related calculators