Free calculator

Excavation Calculator: Dirt Yards, Swell & Truckloads

Bank yards, loose yards with soil swell factor, and dump-truck loads to haul the dirt away. No sign-up; the math runs entirely in your browser.

By Basharat Ali, FounderCalculation reviewedUpdated October 2026

feet

feet

feet

swell factor

cubic yards

Truckloads to haul away

4 loads

In the ground (bank yards)

29.63 cu yd

Loose, after 25% swell

37.04 cu yd

Steps: bank = L × W × D ÷ 27; loose = bank × (1 + 25% swell); loads = ceil(37.04 ÷ 12 per truck). You dig bank yards but haul loose yards — the pile is always bigger than the hole.

Estimated cost

What will it cost?

Enter your local store prices — prices vary by region.

  • Haul-off (truckloads)

    4 loads

    —

Estimate — prices vary by store and region. Check your local store for current pricing.

Worked example: 20×20 ft, 2 ft deep

Full arithmetic, step by step (common soil, 12-yd trucks):

  1. Bank yards: 20 × 20 × 2 / 27 = 29.63 cu yd
  2. Loose yards: 29.63 × 1.25 = 37.04 cu yd
  3. Truckloads: 37.04 / 12 = 3.09 → 4 loads

The formulas

Bank and loose yards

Bank = L × W × D / 27; loose = bank × (1 + swell) — 12% sand/gravel, 25% common soil, 35% clay/rock.

Truckloads

Loads = ceil(loose yards / truck capacity) — always round up; a partial load still needs a full trip.

Frequently asked questions

How do I calculate cubic yards of dirt to excavate?

Multiply length x width x depth in feet, then divide by 27. A 20 x 20 ft area dug 2 ft deep is 800 cubic feet / 27 = 29.63 bank cubic yards — the size of the hole in the ground.

What is the swell factor in excavation?

Dug-up soil expands because packed earth breaks into clumps with air gaps. Common soil swells ~25%, so 1 bank yard becomes 1.25 loose yards. Sand and gravel swell 10-15%; dense clay and rock 30%+.

How many cubic yards does a dump truck hold?

A standard tandem-axle dump truck carries roughly 10-14 cubic yards of loose soil (12 is a good default). A smaller single-axle truck holds about 6-8. Always haul by loose yards, not bank yards.

What is the difference between bank yards and loose yards?

Bank yards measure dirt while still compacted in the ground — the hole. Loose yards measure it after digging, when it has swelled. You price the dig by bank yards but order trucks by loose yards.

How many truckloads to remove 30 bank yards of soil?

With 25% swell that's 37.5 loose yards; at 12 yards per truck, 37.5 / 12 = 3.13, so 4 truckloads — a partial load still needs a full trip. The calculator rounds up automatically.

Does this work for a trench or a round hole?

For a trench, enter its length, average width, and depth. For a round hole, use area = 3.14 x radius x radius as your length x width equivalent, or compute the area separately and enter matching L and W values.

Keep estimating

Related calculators