Cost guide

How Much Does Drywall Cost?

Drywall pricing is quoted per square foot of wall and ceiling surface, and the finish level matters as much as the board. Here are the typical ranges for hanging, finishing, and texture, plus what pushes any quote up or down.

By Basharat Ali, FounderCalculation reviewedUpdated October 2026

Ranges, not quotes. All figures below are typical US ranges reported by contractors and home-improvement sources. Actual prices vary widely by region, site conditions, ceiling height, and finish level, use them to evaluate quotes, not replace them.

Quick answer: typical drywall cost ranges

WorkTypical range (per sq ft)
Materials only (board, mud, tape, screws)$0.40-$0.70
Hanging and finishing, installed$1.50-$3.50
Texture (knockdown, orange peel)$0.50-$1.00 extra
Painting (primer + two coats)$1.00-$3.00 extra

A 12x12 ft room with 8 ft ceilings has about 528 sq ft of drywall surface, so hanging and finishing runs roughly $790-$1,850. Texture and paint are usually quoted separately, budget for them on top.

What drives the price

  • Finish level. The biggest lever after area. Standard Level 4 (tape plus three coats) is the norm for textured or painted walls; Level 5 (a full skim coat) costs more and is what smooth, untextured walls need to look right.
  • Ceiling height. Tall ceilings need scaffolding or stilts, longer boards, and slower work. Anything over 9 ft adds labor fast.
  • Board type. Standard 1/2 inch board is the cheapest. Moisture-resistant board for bathrooms, fire-rated 5/8 inch board where code requires it, and sound-dampening board all cost more per sheet.
  • Corners, arches, and niches. Every inside corner, archway, and built-in niche adds taping and sanding time. A plain rectangular room is the cheapest shape to finish.
  • Removal and repair. Tearing out old drywall, hauling it away, and fixing framing or insulation underneath are often separate line items.
  • Texture. Texture hides small flaws, which is why it is cheaper than a smooth finish, but it still adds a full extra pass over every surface.

Worked example: 12x12 ft room, 8 ft ceilings

  1. Surface area: walls (12 + 12 + 12 + 12) x 8 = 384 sq ft, plus ceiling 12 x 12 = 144 sq ft, total 528 sq ft.
  2. Materials takeoff: run your dimensions through our drywall calculator for sheets, mud, tape, and screws.
  3. DIY materials: 528 x $0.40-$0.70 = $210-$370.
  4. Pro installed (hang + finish): 528 x $1.50-$3.50 = $790-$1,850.
  5. Add texture: 528 x $0.50-$1.00 = $265-$530 more. Paint is another $530-$1,580 on top.

DIY vs. hiring a contractor

Hanging boards is heavy, awkward work but straightforward with a helper and a rented drywall lift for ceilings. Finishing is the skill bottleneck: tape bubbles, visible seams, and over-sanded joints all show through paint, and fixing them means re-mudding and re-sanding. If your budget is tight, hang the boards yourself and hire a finisher, you keep the savings where the work is simple and pay a pro where the quality shows. For smooth Level 5 walls, hire the whole job out.

Frequently asked questions

How much does drywall cost for a 12x12 room?

A 12x12 room with 8 ft ceilings has about 528 sq ft of drywall surface (four walls plus ceiling). At typical installed rates of $1.50-$3.50 per sq ft for hanging and finishing, that runs roughly $790-$1,850 before texture and paint. Tall ceilings, closets, and lots of corners push toward the higher end.

Is hanging or finishing the expensive part?

Finishing usually costs more than hanging. Hanging boards is fast, heavy work; finishing (taping, mudding, and sanding through multiple coats) is where the skill lives and where most of the labor hours go. A smooth Level 5 finish costs more than a standard Level 4 finish.

Is 5/8 inch drywall worth it over 1/2 inch?

For most interior walls, 1/2 inch is standard and fine. 5/8 inch is required by code in some spots (garage ceilings, between units) and gives better sound resistance and stiffness on ceilings. It costs a bit more per sheet and is heavier to hang, so use it where code or sound matters, not everywhere by default.

How much does drywall texture cost?

As a typical range, texture adds about $0.50-$1.00 per sq ft on top of hanging and finishing. Knockdown and orange peel are the common choices; smooth finishes cost more because every flaw shows and the sanding must be near-perfect.

Can I install drywall myself?

Hanging is very doable with a helper, a drywall lift for ceilings, and a screw gun. Finishing is the hard part to learn: bad taping shows through paint and is miserable to fix. A common middle path is to hang it yourself and hire a finisher for the mudding and sanding.

Ready to size the job? Use the drywall calculator for sheet counts and mud estimates, then see the paint cost guide for what the finish coats will add.