Cost guide

How Much Does Flooring Cost?

Material choice sets the band, but subfloor prep and removal of the old floor decide where inside the band you land. Here are the typical installed ranges per square foot for the common flooring types, plus what pushes any quote up or down.

By Basharat Ali, FounderCalculation reviewedUpdated October 2026

Ranges, not quotes. All figures below are typical US ranges reported by contractors and home-improvement sources. Actual prices vary widely by region, material quality, subfloor condition, and room shape, use them to evaluate quotes, not replace them.

Quick answer: typical flooring cost ranges

Flooring typeTypical range (per sq ft, installed)
Laminate$3-$8
Luxury vinyl plank (LVP)$4-$10
Carpet$3-$7
Engineered hardwood$6-$14
Solid hardwood$8-$15
Tile$8-$18

A 10x12 ft room (120 sq ft) in luxury vinyl plank therefore runs roughly $480-$1,200 installed, while the same room in tile runs roughly $960-$2,160. Removal of the old floor, underlayment, and trim can add to either figure.

What drives the price

  • Material. The main lever: laminate and vinyl sit at the low end, tile and hardwood at the high end, and within each type, thicker wear layers and wider planks cost more.
  • Subfloor prep. Floating floors need a flat floor. Grinding, patching, or pouring self-leveler is cheap when the floor is nearly flat and expensive when it is not, and it is often discovered only after the old floor comes up.
  • Removal of the old floor. Pulling carpet is quick; pulling glued-down wood or tile, plus hauling it away, is slow and usually billed separately.
  • Underlayment and moisture barriers. Required under most floating floors and over concrete. Padding quality also changes how carpet feels and lasts.
  • Room shape and pattern. Diagonal layouts, herringbone, and rooms full of corners and closets raise both labor and the waste allowance.
  • Trim and stairs. Baseboards, transitions, stair nosing, and stair treads are small items with high labor per piece, stairs in particular can rival the room itself.

Worked example: 10x12 ft room in luxury vinyl plank

  1. Area: 10 x 12 = 120 sq ft.
  2. With waste: 120 sq ft + 10% waste = 132 sq ft to buy. Run your own dimensions through our flooring calculator for boxes and waste.
  3. Installed: 120 x $4-$10 = $480-$1,200.
  4. DIY materials: 132 sq ft of plank plus underlayment, roughly $265-$660 for mid-range plank at $2-$5 per sq ft.
  5. Extras to confirm: old floor removal, new baseboards, and transitions, each quoted separately.

DIY vs. hiring a contractor

Click-together laminate and vinyl plank are the most DIY-friendly floors: a tapping block, a pull bar, and a saw cover most rooms, and a first-timer can finish a bedroom in a weekend. Carpet needs a stretcher and seaming skill. Tile needs layout skill and a wet saw, and mistakes are set in thinset. Solid hardwood needs nail-down tools and often sanding and finishing. If your floor is uneven, start with a pro assessment before buying anything, prep problems sink every flooring type equally.

Frequently asked questions

What is the cheapest flooring to install?

Laminate and luxury vinyl plank are usually the cheapest installed options, roughly $3-$8 and $4-$10 per sq ft installed. Both are click-together floating floors, which keeps labor low, and both are realistic DIY projects, which drops the cost to materials only.

Is luxury vinyl plank better than laminate?

For wet areas, yes: vinyl plank handles water far better than laminate, so it suits kitchens, bathrooms, and basements. Laminate often looks and feels a bit more like wood underfoot and can be cheaper. For living rooms and bedrooms, either works; for anywhere water is likely, pick vinyl.

Does a flooring quote include baseboards and trim?

Not always. Some quotes include removing and reinstalling baseboards, others list it separately, and new baseboards or stair nosing are almost always extra. Ask for trim, transitions, and stair work as explicit line items before comparing quotes.

How much does subfloor leveling cost?

Minor leveling with patch compound is often rolled into the install. Serious work (grinding high spots, pouring self-leveler over a large area, replacing damaged subfloor sheets) is usually quoted separately and can add hundreds to a few thousand dollars depending on how bad the floor is.

How much extra flooring should I buy for waste?

A typical waste allowance is 10% for straight runs in rectangular rooms, more for diagonal layouts, herringbone patterns, or rooms with lots of corners and closets. The flooring calculator on this site adds the waste allowance to your material count automatically.

Ready to size the job? Use the flooring calculator for material counts with waste, and see the tile cost guide if you are comparing tile against plank or laminate.