Cost guide

How Much Does Gravel Cost?

Gravel is sold by the cubic yard, and the total is mostly volume times stone type, plus delivery. Here are the typical material and delivery ranges, plus what pushes any quote up or down.

By Basharat Ali, FounderCalculation reviewedUpdated October 2026

Ranges, not quotes. All figures below are typical US ranges reported by suppliers and home-improvement sources. Actual prices vary widely by region, stone type, delivery distance, and order size, use them to evaluate quotes, not replace them.

Quick answer: typical gravel cost ranges

ItemTypical range
Crushed stone, bulk (per cu yd)$30-$75
Pea gravel, bulk (per cu yd)$35-$80
Delivery (per load)$50-$200 extra
Bagged gravel (0.5 cu ft bag)$4-$6 per bag

A 12x50 ft driveway at 4 inches deep needs about 8 cu yd with waste, so bulk material runs roughly $240-$600 for crushed stone, plus delivery. Bagged gravel costs far more per yard and only makes sense for small repairs and paths.

What drives the price

  • Stone type. Plain crushed stone is the cheapest bulk option. Decorative stone (river rock, pea gravel, specialty colors) costs more per yard, sometimes much more.
  • Depth. The biggest lever after area. A driveway at 6 inches costs 50% more stone than the same driveway at 4 inches, measure the depth you actually need rather than rounding up blindly.
  • Delivery distance and load size. Delivery is priced per load, and small loads cost more per yard than full truckloads. Yards near a quarry pay less; remote delivery costs more.
  • Base prep and excavation. A new driveway needs excavation, grading, and compaction before stone goes down. That earthwork often costs more than the stone itself and is quoted separately.
  • Landscape fabric and edging. Fabric under the stone and edging to hold it in place are small costs that prevent the two common failures: stone sinking into mud and stone migrating into the lawn.
  • Spreading and compaction. A dumped pile is not a driveway. Spreading by machine and compacting in layers is labor or equipment rental on top of material.

Worked example: 12x50 ft driveway, 4 inches deep

  1. Area: 12 x 50 = 600 sq ft.
  2. Volume: 600 x (4 / 12) = 200 cu ft, which is 200 / 27 = 7.4 cu yd. Run your own dimensions through our gravel calculator for yards, tons, and bags.
  3. Order with waste: round up to 8 cu yd.
  4. Material: 8 x $30-$75 = $240-$600 for crushed stone.
  5. Add delivery: roughly $50-$200 per load, so a typical total of $290-$800 before excavation, fabric, and spreading.

DIY vs. hiring a contractor

For paths and small pads, DIY is realistic: order a pile, wheelbarrow it in, rake it level, and compact it with a rented plate compactor. For driveways, hire out the base work at least: excavation depth, drainage slope, and compaction in layers decide whether the driveway holds up or ruts in the first year, and a skid-steer does in an hour what takes a weekend by wheelbarrow. You can still save money by spreading the top layer yourself after the base is done right.

Frequently asked questions

How many cubic yards of gravel do I need for a driveway?

Multiply length x width x depth (in feet), then divide by 27. A 12x50 ft driveway at 4 inches deep is 600 x 0.333 = 200 cu ft, which is 7.4 cu yd. Order about 8 cu yd with a waste allowance. The gravel calculator on this site does this math from your dimensions.

What depth of gravel does a driveway need?

A typical range is 4-6 inches of compacted gravel over a prepared base for a car driveway, deeper (6-8 inches) for heavy vehicles or soft soil. Walkways and garden paths need only 2-3 inches. Depth is the biggest cost lever, so measure it honestly rather than guessing.

Crushed stone or pea gravel for a driveway?

Crushed stone (angular, with fines) locks together under tires and stays put; it is the standard driveway choice. Pea gravel is round, looks nicer, and shifts under tires and feet, so it suits paths and beds better than driveways. For parking areas, pick crushed stone.

How much does gravel delivery cost?

As a typical range, delivery runs about $50-$200 per load on top of the material, and many yards have minimum orders or charge more per yard for small loads. Distance from the quarry is the main variable: a yard across town costs more to deliver than one nearby, so get quotes from the closest suppliers first.

Do I need landscape fabric under gravel?

For driveways, fabric helps keep stone from sinking into soft soil and slows weeds, and it is cheap insurance on new ground. On an existing hard-packed driveway, it matters less. For garden paths and beds, fabric under the gravel is standard practice.

Ready to size the job? Use the gravel calculator for yards, tons, and bags, and see the paver patio cost guide if you are comparing loose gravel against pavers.