Free calculator

Wallpaper Calculator: How Many Rolls Do I Need?

Roll counts for whole rooms or single walls — single and double rolls, doors and windows subtracted, pattern-repeat waste included. No sign-up; the math runs entirely in your browser.

By Basharat Ali, FounderCalculation reviewedUpdated October 2026

feet

feet

feet

sq ft

effective coverage

% for pattern repeat

You need

5 double rolls

Wall area to cover

376 sq ft

With 15% waste

432.4 sq ft

Steps: 376 sq ft ÷ 100 sq ft per double roll × (1 + 15% waste) = 5 rolls, rounded up. Pattern repeats eat more paper — 15% is a safe default.

Estimated cost

What will it cost?

Enter your local store prices — prices vary by region.

  • Wallpaper (double rolls)

    5 rolls

    —

Estimate — prices vary by store and region. Check your local store for current pricing.

Worked example: 12×14 ft room

Full arithmetic, step by step (8-ft ceilings, 40 sq ft of openings, double rolls, 15% waste):

  1. Wall area: 2 × (12 + 14) × 8 = 416 − 40 = 376 sq ft
  2. With 15% waste: 376 × 1.15 = 432.4 sq ft
  3. Double rolls: 432.4 ÷ 100 = 4.32 → 5 rolls

The formulas

Room mode

Area = 2 × (length + width) × height − openings — the four walls minus doors and windows.

Rolls

Rolls = ⌈ area × (1 + waste) ÷ coverage per roll ⌉ — 50 sq ft per single roll, 100 per double, always rounded up.

Frequently asked questions

How many rolls of wallpaper do I need for a 12x14 room?

With 8-ft ceilings and 40 sq ft of doors/windows: wall area is 2 × (12 + 14) × 8 = 416 sq ft, minus 40 = 376 sq ft. With 15% pattern waste that's 432.4 sq ft ÷ 100 per double roll = 4.32, so order 5 double rolls. The calculator does this for any room size.

What is the difference between a single roll and a double roll?

A double roll is simply twice the paper: roughly 100 sq ft of effective coverage versus about 50 sq ft for a single roll. Double rolls are the common retail unit in the US and usually cheaper per square foot — this calculator prices both.

How much extra wallpaper do I need for pattern repeat?

10 to 20% depending on the repeat size. Small all-over patterns waste little; large repeats (24 inches+) can eat 20% or more because every strip must start at the same point in the pattern. The 15% default is a safe middle ground — bump it up for big bold prints.

Should I subtract doors and windows from wallpaper measurements?

Yes — measure each opening and subtract the total square footage. But don't get greedy: the waste allowance already covers trimming around them, so subtract the openings once and let the waste percentage do the rest.

Should I order an extra roll of wallpaper?

Yes, one spare roll is cheap insurance. Wallpaper is printed in dye lots — if you run short mid-project, a new roll can be a visibly different shade. Order the spare with the original batch so the lot numbers match, and keep the receipt.

How much does a roll of wallpaper cover?

A US single roll (20.5 in × 33 ft) covers about 50 square feet effectively after trimming; a double roll covers about 100. Pattern matching reduces usable coverage, which is why the calculator adds a waste allowance on top.

Keep estimating

Related calculators