Free calculator
Insulation Calculator: R-Value, Thickness & Bags
Thickness and bag counts for attics and walls — blown cellulose, fiberglass, batts, and spray foam with R-value targets by climate. No sign-up; the math runs entirely in your browser.
By Basharat Ali, FounderCalculation reviewedUpdated October 2026
square feet
by climate zone
R-3.5 per inch
sq ft — default 30, check your product
Thickness needed
14 in
To buy
34 bags
Steps: 49 ÷ R-3.5/in = 14 inches; 1000 sq ft ÷ 30 sq ft per bag = 34 bags, rounded up. Bag coverage varies by product and depth — confirm against your bag's chart.
Estimated cost
What will it cost?
Enter your local store prices — prices vary by region.
Insulation
34 bags
—
Estimate — prices vary by store and region. Check your local store for current pricing.
Worked example: 1,000 sq ft attic at R-49
Full arithmetic, step by step (blown cellulose, R-3.5/in):
- Thickness: 49 / 3.5 = 14 inches
- Bags: 1,000 / 30 = 33.3 → 34 bags
The formulas
Thickness
Thickness (in) = target R-value / R-value per inch — the physics is exact; only the bag yield varies by product.
Bags
Bags = ceil(area / coverage per bag) — use the coverage chart for your target R-value, not the headline number.
Frequently asked questions
How much insulation do I need for a 1,000 sq ft attic?
At R-49 with blown cellulose (R-3.5/in): 49 / 3.5 = 14 inches deep. Bags: 1,000 sq ft / ~30 sq ft per bag = 34 bags, rounded up. Coverage per bag varies by product and installed depth, so confirm against your bag's coverage chart.
What R-value do I need for my attic?
Warm climates: R-30. Moderate: R-38. Cold: R-49. Very cold: R-60. Walls run lower: R-13 to R-21. Your local building code sets the minimum — the calculator covers R-13 through R-60 so you can match your zone.
How thick does insulation need to be for R-49?
Divide 49 by the material's R-value per inch: blown cellulose (R-3.5) needs 14 in, blown fiberglass (R-2.5) needs 19.6 in, closed-cell spray foam (R-6.5) needs 7.5 in. Higher R-per-inch means thinner installs in tight spaces.
Can I install attic insulation myself?
Yes — blown-in is one of the easiest DIY projects. Home Depot and Lowe's rent the blower machine free with a bag purchase, and a 1,000 sq ft attic takes 2-4 hours with two people. Spray foam should be left to professionals.
Which is better: blown-in or batt insulation?
Blown-in fills around obstacles and covers large open attics fast with fewer gaps; batts are simplest for small, straight runs between standard joists. For the same R-value, installed performance is close — coverage and air-sealing matter more than the format.
Why does bag coverage vary so much?
Because a bag covers less area at greater depths. The same bag might cover 40 sq ft at R-30 but only 25 sq ft at R-49. Always use the coverage chart printed for your target R-value, not the biggest number on the bag.
Keep estimating