Free calculator

Lumber Calculator: Board Feet, Studs & Board Counts

Three tools in one: board feet from any dimensions, stud counts for wall framing, and board quantities for decking or fencing runs — with the nominal-vs.-actual size table so you never measure wrong. No sign-up; the math runs entirely in your browser.

By Basharat Ali, FounderCalculation reviewedUpdated October 2026

count

inches (nominal)

inches (nominal)

feet

You need

53.33 board feet

= 80 linear feet total

Board feet = (thickness × width × length × pieces) ÷ 12, with thickness and width in inches and length in feet. One board foot is a 12″ × 12″ × 1″ volume of wood.

Nominal vs. actual lumber sizes (inches)
NominalActual
2×41½ × 3½
2×61½ × 5½
2×81½ × 7¼
2×101½ × 9¼
2×121½ × 11¼
4×43½ × 3½

Estimated cost

What will it cost?

Enter your local store prices — prices vary by region.

  • Lumber

    10 pieces

    —

Estimate — prices vary by store and region. Check your local store for current pricing.

Worked example: ten 2×4×8 boards

Full arithmetic, step by step (matches the calculator defaults):

  1. Board feet: (10 × 2 × 4 × 8) ÷ 12 = 53.33 bf
  2. Linear feet: 10 × 8 = 80 ft
  3. Wall check: a 20-ft wall at 16″ on center needs ⌈240 ÷ 16⌉ + 1 = 16 studs + 60 ft of plates
  4. Boards check: a 16-ft run at 5½″ + ¼″ gap needs ⌈192 ÷ 5.75⌉ = 34 boards

The formulas

Board feet

BF = (T × W × L × N) ÷ 12 — thickness and width in inches (nominal), length in feet, N pieces. Exact by convention.

Wall studs

Studs = ⌈ (wall inches ÷ spacing) ⌉ + 1, plates = 3 × wall length (bottom + double top). Field count — add for corners and openings.

Boards for a run

Boards = ⌈ run inches ÷ (actual width + gap) ⌉ — always with the actual width, rounded up.

Frequently asked questions

What is a board foot?

A board foot is 144 cubic inches of wood — a board 12 inches wide, 12 inches long, and 1 inch thick. The formula is (thickness × width × length × pieces) ÷ 12, with thickness and width in inches and length in feet. Hardwood is commonly priced per board foot.

How many board feet are in ten 2×4×8 boards?

(10 × 2 × 4 × 8) ÷ 12 = 53.33 board feet, and 80 linear feet total. Note the formula uses nominal sizes (a 2×4 counts as 2 × 4), which is the standard convention for board-foot pricing.

How many studs do I need for a 20-ft wall?

At 16 inches on center: ⌈240 ÷ 16⌉ + 1 = 16 studs for the field, plus a bottom plate and double top plate (3 × 20 = 60 linear feet of plate stock). Add extra studs for corners, door and window openings, and headers — the calculator gives the field count.

What is the difference between nominal and actual lumber sizes?

Nominal is the name; actual is the size after milling. A 2×4 is actually 1½ × 3½ inches, a 2×6 is 1½ × 5½, and a 4×4 is 3½ × 3½. Use actual sizes when a board has to fit a gap (decking, shelving); board-foot math conventionally uses nominal.

How many deck boards do I need for a 16-ft run?

With 5½-in (actual) boards and a ¼-in gap: ⌈192 ÷ 5.75⌉ = 34 boards. Always measure with the actual board width — using the nominal 6 inches would leave you a board short.

Should I buy extra lumber beyond the calculated count?

Yes — lumber is the one material where culling matters more than math. Boards come warped, twisted, or split, so buy 10% extra (or hand-pick every board at the yard) for anything visible like decking or trim. Framing hidden inside walls can run closer to the calculated count.

Keep estimating

Related calculators