Free calculator

Roof Shingle Calculator: Bundles, Squares & Waste

Bundles and roofing squares from footprint and pitch — with waste factors, underlayment rolls, and cost estimates. No sign-up; the math runs entirely in your browser.

By Basharat Ali, FounderCalculation reviewedUpdated October 2026

feet

feet

x in 12

sets waste %

bundles per square

You need

45 bundles

Roof area + waste

1,475.8 sq ft

Squares

14.76

Underlayment rolls

4

Steps: 1200 footprint × 1.118 pitch factor = 1341.6 sq ft × (1 + 10% waste) = 1475.8 sq ft = 14.76 squares × 3 bundles = 45 bundles. One square = 100 sq ft.

Estimated cost

What will it cost?

Enter your local store prices — prices vary by region.

  • Shingle bundles

    45 bundles

    —

  • Underlayment rolls

    4 rolls

    —

Estimate — prices vary by store and region. Check your local store for current pricing.

Worked example: 40×30 ft house, 6/12 pitch

Full arithmetic, step by step (gable roof, 10% waste):

  1. Footprint: 40 × 30 = 1,200 sq ft
  2. Pitch factor: sqrt(36 + 144) / 12 = 1.118
  3. Roof area: 1,200 × 1.118 = 1,341.6 sq ft
  4. With waste: 1,341.6 × 1.10 = 1,475.8 sq ft = 14.76 squares
  5. Bundles: 14.76 × 3 = 44.27 → 45 bundles

The formulas

Squares

Squares = footprint × sqrt(pitch² + 144) / 12 × (1 + waste) / 100 — the pitch factor converts flat footprint to sloped area.

Bundles

Bundles = ceil(squares × bundles per square) — 3 for standard, 4 for premium; always check the wrapper.

Frequently asked questions

How many bundles of shingles do I need?

For standard 3-tab or architectural shingles: squares x 3 bundles, plus 10-20% waste, rounded up. A 14.76-square roof needs 45 bundles. Premium designer shingles run 4 bundles per square — check your wrapper and adjust.

How many bundles of shingles are in a square?

Three, for standard shingles. A roofing square is 100 sq ft of finished roof, and a bundle of 3-tab or architectural shingles covers ~33.3 sq ft. Heavy designer lines take 4-5 bundles per square.

How does roof pitch change how many shingles I need?

A steeper roof has more surface than its footprint. The pitch factor is sqrt(rise^2 + 12^2) / 12: 1.118 at 6/12 (11.8% more), 1.414 at 12/12 (41% more). The calculator applies it automatically from your x-in-12 pitch.

What waste factor should I use for shingles?

10% for simple gable roofs, 15% for hip or complex roofs, 20%+ for cut-up roofs with many valleys and dormers. First-time DIY installers should add another 5% for the learning curve.

How many shingles are in a bundle?

About 26-29 per bundle for 3-tab and 21-25 for architectural shingles; 3 bundles cover one square. The count that matters is the coverage printed on the wrapper — if it says 25 sq ft per bundle, you need 4 per square.

What is the minimum roof pitch for asphalt shingles?

4/12 for standard application. Between 2/12 and 4/12 needs special low-slope methods with full ice-and-water underlayment. Below 2/12, shingles aren't recommended — use rolled roofing or a membrane instead.

Keep estimating

Related calculators